. Nice Housing, Stoutness & Stability, Advanced and Reliable functions, Perfect & Valuable. AT-588 mobile radio especially designs for drivers and it pursues company philosophy of innovation and practicality. NOTE Models Apply To This Manual: AT-588 Mobile radio AT-588 Mobile Radio Applicable Software: QPS588. If an abnormal odor or smoke is detected coming from the transceiver, turn OFF the power immediately. Contact an Anytone service station or your dealer.

• Ray 240 Vhf Manual
• Raytheon 210 Vhf Manual

Do not transmit with high output power for extended periods; the transceiver may overheat. CONTENTS.1 Transmitting Optional Signaling.13 Channel Edit.13 Supplied Accessories/Optional Accessories.2 Channel Delete.13 Supplied Accessories. 2 Shortcut Operations.14 Optional Accessories. 2 Squelch Off/Squelch Off Momentary.14.3 Squelch Level Setup.

- Wow Ulduar Patch Notes - 6 Year Medical School Programs Caribbean - Anytone At 588 Vhf Manual Arts - Driver Uli Sata Windows 7 - Dane Elec So Smart Firmware Updater - Serial Fax Server Providers - Cinque Storie Ferraresi.

14 Mobile Installation.3 DC Power Cable Connection. CONTENTS HIGH/MID/LOW Power Selection. 20 Squelch Level.

Ray 240 Vhf Manual

27 Band-width Selection. 20 Optional Signaling.27 TX OFF Setup. 21 Scan Skip.28 Frequency/Channel Scan. 28 Busy Channel Lockout.21 Busy Channel Lockout.28 Editing Channel Name. New and Innovative Features AT-588 Mobile Radio has nice housing, stoutness & stability, advanced and reliable functions, perfect & valuable. This amateur mobile radio especially designs for drivers and it pursues company philosophy of innovation and practicality.

Raytheon 210 Vhf Manual

More functions as follows: Display on a large LCD with adjustable brightness, convenient for nighttime use. Supplied Accessories/Optional Accessories Supplied Accessories After carefully unpacking the transceiver, identify the items listed in the table below. We suggest you keep the box and packaging. Transceiver Microphone (QHM-03) Mobile Mounting DC Power Cable with Hardware Kit for Bracket Black screws Tapping screws (with DTMF keyboard) Bracket (QMB-01).

Initial Installation Determine the appropriate angle of the transceiver, using the 3 screw Mobile installation hole positions on the side of the mounting bracket. To install the transceiver, select a safe, convenient location inside your vehicle that minimizes danger to your passengers and yourself while the vehicle is in motion.

Initial Installation DC Power Cable Connection Locate the power input connector as close to the transceiver as possible. Mobile Operation Black The vehicle battery must have a nominal rating of 12V.

Never connect the transceiver to a 24V battery. Be sure to use a 12V Connect the DC power cable to the transceiver's power supply vehicle battery that has sufficient current capacity. Initial Installation Use the supplied DC power cable to connect the transceiver to a To turn on the unit, press the power switch manually while it is regulated power supply. (While ignition key is at ACC or ON position) When the ignition key is turned to ACC or ON position with the Do not substitute a cable with smaller gauge wires. Initial Installation REPLACING FUSES If the fuse blows, determine the cause, then correct the problem. After the problem is resolved, replace the fuse.

If newly installed fuses continue to blow, disconnect the power cable and contact your autho- rized dealer or an authorized servi- The range of displayed voltage is only from 7V to16V DC, because the cecenter for assistance. Initial Installation Accessories Connections Microphone For voice communications, connect a microphone equipped with External Speaker an 8-pin modular plug into the modular socket on the front of the If you plan to use an external speaker, choose a speaker with an the supplied microphone hanger in an appropriate location using the mono (2-conductor) plug. Getting Acquainted Front panel Press key until key.

KEY FUN/SET V/M/MW Stores data into channels MHz/SHIFT Sets offset direction and offset frequency TS/DCS/LOCK Sets Keypad lock function Switches between HI, MID and LOW power CAL/ H/L transmission SQL/D Compander mode on/off Press NO. Getting Acquainted Rear panel NO. KEY Squelch level.

In channel mode. Indicates the channel number in channel mode. Decimal point Channel skip. Indicates the decimal point of frequency and the Decimal point scanning function.

Indicates the frequency or memory name. Signal is being received or monitor. Getting Acquainted microphone MIC Connector Diagram(in the front view of connector) NO.

KEY Increase frequency,channel number or setting value. DOWN Decrease frequency, channel number or setting value. Press the PTT (Push-TO-Talk) key to transmit. Number Key Input VFO frequency or DTMF dial out etc. D T M F O N / Switches between DTMF dialing or function operating. WORKING MODE (AMATEUR TRANSCEIVER OR PROFESSIONAL TRANSCEIVER) According to practical application,you can set the radio works as Amateur Transceiver mode or Professional Transceiver mode.

There This mode shows only frequency are also 2 levels operation menu to set functions as you need. It is easy on the display. Basic Operations frequency in screen will be auto-hidden. In this status, turn selector Switching The Power On/Off PWR KEY knob or Microphone key will increase or decrease according to the option selected during frequency quickly by 1MHz step. Installation Press the switch or turn the Under channel mode, you can change the current channel to the.

Basic Operations Please hold the microphone approximately 2.5-5.0cm from your lips, Channel Delete and then speak into the microphone in your normal speaking voice to Under channel mode, turn selector knob to select channel which get best timbre. You want to delete.

Press and hold PTT key, LED lights RED and power intensity showed in Press key and. Shortcut Operations Turn selector knob or press Microphone key to squelch off/squelch off momeNTARY change scan direction. Key programmed as Squelch Off or Squelch Off Momentary to monitor the weak signal. Press any key except key to exit. Squelch Off: Press key to disable squelch,press Channel Scan. Shortcut Operations When LCD appears iron, it means current channe can be set HIGH/MID/LOW Power switch with DCS encode and decode together, turn selector knob or press Press key until LCD display iron, Microphone's to select desired DCS encode and decode.

Shortcut Operations Offset Direction and offset frequency setup KEYPAD LOCKOUT Avoiding unintentional operation, this function will lock main keys, all Repeater receives a signal(UP-LINK) on one frequency and re- transmits on another frequency(DOWN-LINK). The difference between keys except key are invalid. These two frequencies is called the offset frequency.

Shortcut Operations Turn selector knob to choose group you desired. Total:16 group,01-16.

Press key to enter into editing of current group,press MIC's numeric keys to set your desired data. The display scrolls when the 7th digit is entered.

The numbers 0-9, -, A-D,. and # can be stored up to a total of 23 digits. General Setting features such as ANI, PTT ID, group call, remotely stun,remotely kill, Press and hold key for over 2s to enter general setting menu.

The signalling edition must be done through programming Press to select the desired function option. General Setting Press directly to transmit the pre-stored 5-Tone signaling. P r e s s k e y t o c h o o s e No.04 menu, LCD displays '5TON In 5Tone signaling mode,press for 2s until LCD displays XX','XX'indicates the group in the list. General Setting HIGH/MID/LOW Power Selection Press and hold key for over 2s to enter general setting menu. Press and hold key for over 2s to enter general setting menu.

Press key to choose No.06 menu, LCD displays 'SPK-SQ'. Press key to choose No.07 menu, LCD displays”POW-HI”. General Setting BU: Enable BCLO, Carrier lockout, transmitting is inhibited when TX OFF SETUP current channel receives a matching carrier;press PTT to emit Disable this function,it is invalid to press PTT,current channel only error voice prompt and back to receiving status. Works in RX mode. General Setting Press key to choose No.14 Press key to choose No.12 menu, LCD displays”COMP-OFF”. Menu, LCD displays 'REV—OF'.

Turn selector knob to select the desired Turn selector knob to select the desired setting. ON:Enable compander ON:Enable Frequency Reverse OFF:Disable Frequency Reverse. General Setting menu, LCD displays”D-XXX” XXX is radio's DTMF SELF ID. TOT (Time-out timer) Press The time-out timer limits the amount of transmitting time. When you reach the time limit which has been programmed by your dealer, your Radio's 5TONE SELF ID ENQUIRY transmission will be cut off. General Setting Press 1HOUR:Auto power off after 1h 2HOUR:Auto power off after 2h Press,then turn selector knob also can select the desired OFF:Disable Auto power off squelch level.

If the transceiver has set at higher squelch level,it may fail to hear Press the calling.If set at lower squelch level,the radio will be interfered. General Setting menu, LCD displays'LAMP-25' P r e s s k e y t o c h o o s e N o. 2 6 m e n u, L C D Turn selector knob to select the desired LCD backlight brightness displays'DSP—FR'.

General Setting Address list Press and hold key for over 2s to You store desired ID and corresponding ID name in address list.The enter general setting menu. LCD displays ID corresponding name if radio received ANI calling and Press key to choose No.29 menu, LCD displays'RESTORE'. Microphone Operation DOWN Switches between VFO and channel mode In standby,press key to switch between channel mode and Frequency mode (VFO). Short Calling In standby,press to transmit the selected DTMF/2TONE/5TONE Numeric Keys in current channel.:In standby,press,LCD displays DTMF ON/OFF Lock DTMF data and group.Press key to select the. Microphone Operation BU: Enable BCLO, Carrier lockout, transmitting is inhibited when When first bit of Exa byte in frequency displays 'F',it current channel receives a matching carrier;press PTT to emit error indicates 5Tone function enable. Voice prompt.

This function can be temporarily used in channel mode. Once the RL: Enable BTLO, transmitting is inhibited when current channel radio is turned off or switched to another channel, the temporary receives a matching carrier but dis-matching CTCSS/DCS.press. Microphone Operation TOT (Time-out timer) Talk Around By Talk Around function,you can directly communicate with other radios The time-out timer limits the amount of transmitting time. When you in your group in case the repeater is not activated or when you are out of reach the time limit which has been programmed by your dealer, your the repeater range.

Microphone Operation HI:High Power MI:Middle Power LOW:Low Power Press number keys to exit and store. LCD Backlight In standby status,press, then press LCD displays'LAMP- XX'. Press to select desired backlight brightness(1-32 levels). Long-distance Anti-theft Alarm When the alarm cable QL-01(A) or QL-01(B) is removed from the This function is mainly use for simple anti-theft alarm device in vehicles.

When the transceiver be removed in an improper manner,the transceiver DATA jack or cut by improper sequence, the alarm function enable will emit and transmit alarming and background voice to system and and will alarm as programmed. Cable Clone This feature will copy the programmed data and parameters in the master unit to slave units. It copies the parameters and memory program settings. Use optional CP50 cloning cable, connect the cable between the data jacks on both master and slave. Press and hold key, then press key to enter into cloning mode, LCD displays '. Programming Software Installing and Starting (in windows XP system) Double click ”QPS588 setup.exe“, then follow the installing instruction.

Install USB Cable Driver Programme (As pic 1) Click start menu in computer, under “ALL PROGRAMS” menu, choose and click “USB To Com port” in QPS588 program, install “USB To Com port”. Maintenance Default Setting after Resetting(VHF) Trouble Shooting DCS encode Problem Possible Causes and Potential Solutions AT-588 and decode + and - polarities of power connection Power is on, nothing are reversed. Connect red lead to plus VFO frequency 145.00MHz DCS code 023N appears on Display. Specifications General VHF: 136-174MHz Wide band Narrow band Frequency Range 245-245.9875MHz (220260MHz) Sensitivity UHF: 400490MHz (12dB Sinad) Adjacent Channel Number of Channels 200 channels Selectivity 25K (Wide Band) Intermodulation Channel Spacing 20K(Middle Band) Spurious Rejection 12.5K (Narrow band) 5KHz, 6.25KHz, 8.33KHz, 10KHz, 12.5KHz, Audio Response +1-3dB(0.33KHz) +1-3dB(0.32.55KHz).

Attached Chart 50 groups CTCSS Tone Frequency(Hz) 1024 groups DCS Code. 67.0 79.7 94.8 110.9 131.8 156.7 171.3 186.2 203.5 229.1 69.3 82.5 97.4 114.8 136.5 159.8 173.8 189.9 206.5 233.6 71.9 85.4 100.0 118.8 141.3 162.2 177.3 192.8 210.7 241.8 74.4 88.5 103.5 123.0 146.2 165.5 179.9 196.6 218.1 250.3 77.0 91.5 107.2 127.3 151.4 167.9 183.5 199.5 225.7 254.1. Attached Chart N is positive code, is negative code, total: 232groups.